Jobsking
Profession · Full profile

Aircraft Mechanic

Inspect, repair, and maintain aircraft systems to meet FAA safety and airworthiness standards.

Average salary
$79,870
Salary range
$48,780 – $128,890
Training time
18 to 24 months
Job market
Faster than average
8/10
Work-life balance
Fair
5/10

Aircraft mechanics inspect, diagnose, and repair aircraft engines, landing gear, and airframes. They run system checks, replace worn components, and verify that every maintenance task complies with FAA regulations and manufacturer maintenance instructions. They record all completed work in aircraft logbooks. Pay and job figures cover aircraft mechanics and service technicians, the official group that includes aircraft mechanics. The profession requires physical work on repair floors and hangars around the clock.

A workday

A day in the life

What does a workday really look like?

A scheduled maintenance day shift focused on heavy airframe inspections and component overhauls inside an airline hangar.

  1. 7:00 AM
    Shift briefing and turnover

    Review open discrepancies and aircraft status with the outgoing night shift supervisor.

  2. 7:30 AM
    Airframe and landing gear inspection

    Inspect landing gear assemblies, brake lines, and structural points according to the scheduled maintenance check checklist.

  3. 10:30 AM
    Hydraulic troubleshooting

    Diagnose hydraulic pressure loss on an actuator using test equipment and manufacturer schematics.

  4. 12:00 PM
    Lunch and tool inventory

    Take a meal break and complete mandatory tool checks to verify no equipment is left in the aircraft.

  5. 12:45 PM
    Component replacement

    Remove a worn hydraulic pump and install a new replacement part following FAA regulations.

  6. 2:30 PM
    System operational test

    Pressurize the system and run operational tests to confirm the replacement pump functions properly.

  7. 3:00 PM
    Logbook documentation

    Record part serial numbers, inspection steps, and sign off the repair in the aircraft maintenance logbook.

Task breakdown

An overnight flight line shift troubleshooting urgent mechanical issues on turnaround flights between scheduled departures.

  1. 9:00 PM
    Turnover and flight line prep

    Check inbound flight reports and assign line technicians to arriving gates.

  2. 9:30 PM
    Arrival inspection and pilot debrief

    Meet incoming aircraft, review pilot reports, and run walk-around visual inspections on engines and tires.

  3. 11:00 PM
    Engine troubleshooting

    Hook up diagnostic test equipment to investigate an engine sensor warning reported in flight.

  4. 1:30 AM
    Meal break

    Take a mid-shift break in the line maintenance ready room.

  5. 2:15 AM
    Sensor replacement and functional check

    Replace the faulty engine sensor in tight engine cowl spaces and run built-in test software.

  6. 4:30 AM
    Logbook sign-off

    Certify airworthiness for the morning flight and enter all repair notes in the carrier database.

  7. 5:00 AM
    Morning briefing and handover

    Brief the oncoming day shift lead on cleared maintenance items and remaining aircraft parked on the ramp.

Salary data

What do you really earn?

Salary by experience, sector and region.

Minimum
$48,780
Average
$79,870
Maximum
$128,890

Salary by region

RegionMinAvg.Max
National$48,780$79,870$128,890
Texas$48,600$84,440$122,180
Florida$45,500$76,940$130,190
California$53,860$86,100$116,690
Oklahoma$51,130$74,390$108,770
Georgia$47,240$75,640$133,250

Typical benefits

Flight privileges
Free or reduced-price flights at many airlines.
Health and retirement coverage
Health insurance and retirement plans.
Shift premiums
Shift differentials for night, weekend, and holiday schedules.
Type training
Paid training on new aircraft types.

Pathways

Education pathways

Which paths lead to this profession?

Certificate

18 to 24 months

FAA-approved aviation maintenance technician school

Graduates can take the FAA written, oral and practical exams. This is the most common route to the A&P certificate.

Entry requirements
High school diploma or equivalent
High school subjects
Airframe structures, powerplants, electrical systems, FAA regulations
On-the-job training

18 to 30 months

Supervised experience under certificated mechanics

The FAA allows 18 months of experience for one rating or 30 months for both while working directly under certified personnel.

Costs
Paid by the employer
Entry requirements
Must be at least 18 and able to read, write and speak English
High school subjects
Practical hangar maintenance, system troubleshooting, airframe repair
Other

Varies by branch

Military aviation maintenance training

Military experience can count toward FAA certification requirements when transitioning into civil aviation.

Entry requirements
Military enlistment
High school subjects
Military aircraft powerplants, avionics systems, ground support

Profile

Skills & personality

Is this a good fit for you?

Hard skills

  • Aircraft engine maintenanceInspecting, repairing, and testing piston and turbine engines using manufacturer manuals.
  • Hydraulic and pneumatic systemsDiagnosing and fixing pressure lines, actuators, pumps, and landing gear mechanisms.
  • Avionics and electrical troubleshootingTracing electrical circuits, testing avionics units, and repairing damaged wiring.
  • Reading technical manuals and schematicsInterpreting complex wiring diagrams, maintenance manuals, and engineering blueprints.
  • FAA regulationsApplying federal aviation standards, airworthiness directives, and formal sign-off requirements.
  • Use of precision measuring toolsOperating micrometers, torque wrenches, and calipers to verify exact engineering tolerances.

Soft skills

  • Attention to detailNoticing minute structural cracks, worn seals, or hardware discrepancies that affect flight safety.
  • ResponsibilityTaking personal ownership of repair quality and signing off only fully compliant work.
  • Problem solvingMethodically isolating elusive mechanical and electrical faults under tight time constraints.
  • TeamworkCollaborating effectively with flight crews, inspectors, and other hangar mechanics.

Is this a good fit for you?

  • ✓
    MethodicalFollows rigorous checklists, manufacturer manuals, and safety steps without cutting corners.
  • ✓
    VigilantMaintains deep focus when inspecting flight-critical parts in noisy and distracting environments.
  • ✓
    DependableTakes pride in airworthiness certifications and stands behind every logbook endorsement.
  • ✓
    AdaptableHandles variable work shifts, unexpected mechanical discrepancies, and harsh outdoor weather.
  • ✓
    InquisitiveEnjoys diagnosing how mechanical, pneumatic, and electronic assemblies interact.

Market

Job market & outlook

What does the market look like?

Openings per year
11,400
Trend
Growth
Growth
+5.4%
AI impact
2/10
Aircraft health monitoring and predictive maintenance software flag problems early. Hands-on repairs, inspections and signing off airworthiness stay with certified people.

Regional demand

Oklahoma
Very high concentration of maintenance demand anchored by large airline overhaul bases and military repair facilities.
10/10
Florida
Strong demand powered by major international gateway airports and extensive flight maintenance stations.
8/10
Georgia
Robust recruitment driven by major airline headquarters and expansive regional maintenance facilities.
8/10
Texas
Active aviation hub with steady demand across major commercial hubs and maintenance repair facilities.
7/10
California
Steady need for certificated technicians across commercial airlines and aerospace manufacturing centers.
4/10

Growth

Career paths

Where can this profession take you?

Vertical growth

  1. Apprentice or helper mechanic
    0-2 years

    Assists certificated technicians on inspections and repairs while learning maintenance procedures.

  2. Certificated A&P mechanic
    2-5 years

    Holds full FAA Airframe and Powerplant ratings to diagnose issues, make repairs, and sign logbooks.

  3. Lead mechanic or inspector
    5-10 years

    Guides maintenance crews, audits complex airframe repairs, and holds Inspection Authorization.

  4. Maintenance supervisor or manager
    10+ years

    Oversees hangar operations, workforce scheduling, regulatory compliance, and department maintenance budgets.

Horizontal move

  • Aircraft assembler

    Applies structural assembly and mechanical installation knowledge directly on manufacturing assembly lines.

  • Quality inspector

    Examines completed assemblies, airworthiness documentation, and adherence to FAA specifications.

    View Quality Inspector

Good to know

Practical info

Working hours
Usually full time, with overtime common when aircraft must be returned to service quickly.
Remote work
Remote work is not possible because mechanics must work directly on the aircraft.
Physical requirements
Work in hangars, on flight lines and on repair floors, with noise, standing on ladders and scaffolds, lifting heavy parts and working in tight spaces and all weather.
Typical employers
Commercial airlines, aircraft maintenance and repair stations, aircraft manufacturers, charter and cargo carriers, government agencies and the military, private and corporate aviation.
Professional associations
Professional Aviation Maintenance Association (PAMA), Aircraft Electronics Association.

FAQ

Frequently asked questions

What certification is required to work as an aircraft mechanic?

An FAA mechanic certificate with Airframe and Powerplant ratings is required to sign off most work. Candidates earn these credentials by finishing an FAA-approved training program or by completing 18 to 30 months of documented practical experience. After qualifying, technicians pass written, oral, and practical examinations. Some advanced roles also require an Inspection Authorization or an FCC license for avionics work.

Can an aircraft mechanic work remotely?

Remote work is not possible because mechanics must work directly on the aircraft. They perform hands-on duties such as inspecting engine components, testing hydraulic lines, and turning wrenches inside hangars or on airport ramps. Every part replacement and physical functional test demands their direct personal presence at the aircraft.

What are the standard working hours for this profession?

Work is usually full time, with overtime common when aircraft must be returned to service quickly. Because airlines and repair stations operate around the clock, shifts run day and night. Night, weekend, and holiday shifts are common for mechanics across commercial airlines and repair bases.

What physical challenges do aircraft mechanics encounter?

Mechanics face loud engine noise, heavy lifting, and demanding environments on repair floors and flight lines. They work outdoors in all weather conditions, balance on ladders, and stand on elevated scaffolds. Technicians also maneuver into tight compartments inside airframes and engine cowlings during inspections.

How will automation and artificial intelligence affect aircraft mechanics?

Aircraft health monitoring and predictive maintenance software flag problems early, but they do not replace human mechanics. Hands-on repairs, physical inspections, and signing off legal airworthiness certificates stay with certified people. Software serves as a diagnostic aid while physical maintenance remains entirely manual.

What types of employers hire aircraft mechanics?

Commercial airlines, aircraft maintenance and repair stations, and aircraft manufacturers hire mechanics regularly. Opportunities also exist with charter and cargo carriers, private and corporate aviation operators, and government agencies and the military. These employers maintain diverse fleets ranging from small turboprops to wide-body transport jets.

What is the typical career progression for an aircraft mechanic?

Workers often start as apprentice or helper mechanics before earning their certificated A&P mechanic credentials. With several years of shop experience, technicians advance to lead mechanic or inspector roles, where they audit repairs. Experienced mechanics can ultimately move up into maintenance supervisor or manager positions directing hangar operations.

Read next

Cover letters in this category

In depth

All about aircraft mechanic

The background, context and details.

Daily maintenance and inspection tasks

Aircraft mechanics keep airplanes airworthy. They inspect engines and landing gear during scheduled checks. When pilots report issues, mechanics diagnose mechanical and electrical faults using manuals and test equipment. They repair or replace worn and damaged parts on airframes and engines. Safety standards remain exacting. Technicians follow FAA regulations and manufacturer maintenance instructions on every task. After finishing structural or mechanical repairs, technicians test aircraft systems to confirm that every assembly works correctly before flight. They record all maintenance and inspections in aircraft logbooks. Federal regulations require an FAA mechanic certificate with Airframe and Powerplant ratings to sign off most work. Because aviation safety depends on complete regulatory adherence, technicians verify every repair against official technical manuals and record each replaced component directly into permanent aircraft logbooks before returning equipment to service.

Working conditions and schedule demands

Remote work is not possible. Mechanics must work directly on the aircraft. Maintenance duties take place in hangars, on flight lines, and across repair floors. Noise is constant. Technicians stand on ladders and scaffolds while lifting heavy parts in tight spaces. Outdoor flight lines expose crews to all weather conditions. Work is usually full time. Airlines and repair stations work around the clock, so night shifts and weekend shifts are common. New mechanics often start on night and weekend shifts. Pressure to return aircraft to service on time can be high. Overtime is common when grounded passenger aircraft must be returned to service quickly to prevent flight delays, requiring mechanics to troubleshoot assemblies under tight operational turnaround deadlines.

Diagnostic technology and manual craft

Predictive maintenance software and aircraft health monitoring tools flag problems early. Software cannot turn wrenches. Hands-on repairs and signing off airworthiness stay strictly with certified people. Mechanics rely on precision measuring tools and technical schematics. Even as digital diagnostic systems identify potential component wear before parts fail in flight, certificated mechanics still perform the physical disassembly and critical functional verification required to keep aircraft safe.

Education paths and career entry

Most technicians enter the profession by attending an FAA-approved aviation maintenance technician school. These programs run 18 to 24 months, requiring a high school diploma or equivalent. Graduates can take the written and practical FAA exams. Another path involves 18 to 30 months of supervised experience under certificated mechanics. Military aviation maintenance training also counts toward FAA certification requirements. Typical employers across the country include:

  • Commercial airlines
  • Aircraft maintenance and repair stations
  • Aircraft manufacturers
  • Charter and cargo carriers
  • Government agencies and the military
  • Private and corporate aviation

Contact an FAA-approved aviation maintenance technician school to begin testing preparation.